Segway x2 SE - Page 109

107
Figure 67: i2 SE Valve Stem Location
CheckingTireInationPressure
WARNING
Inflate Tires to the correct pressure (see "Segway Specifications," p. 12).
Overinflating or under inflating Tires can increase your risk of traction loss,
possibly resulting in injury or falls.
NOTE:
The valve stem is visible on the x2 SE. You do not need to tip the x2 SE on its
side to check or adjust Tire inflation pressure.
Tool Required: Low pressure tire gauge
To check Tire inflation pressure for the i2 SE:
1. Make sure the Segway PT is unplugged and powered off.
2. Tip the PT onto its side on a smooth, clean surface. Make sure the
Tire to be checked is on the ground.
3. Rotate the Powerbase until the valve stem on the inside of the
Wheel becomes visible (see Figure 67).
4. Check the Tire inflation pressure.