EasyManua.ls Logo

Seiko 7B24 - Page 75

Seiko 7B24
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
155
Troubleshooting
AtTrouble Possiblecauses
Misalignment
ofthedate
Thereceptionresultdisplay
conrmssuccessfulreception,
andthecorrecttimeisdisplayed,
butthewrongdateisdisplayed.
Thedateisoutofpreliminaryposition.
Thishappenswhenthedateisoutofpreliminarypositionasaresult
ofinuenceofvariousexternalsourcesorafterthebuilt-inICisreset.
Operation
Thecrownorbuttons
cannotbeoperated.
Thestoredelectricpowerisrunningshort.
Dateanddayaremovingrightafterasetting
iscarriedoutbythecrownorbuttonoperation.
Yougetlostin
themiddleofthe
operation.
-------------------------
Others
Bluronthedialglass
persists.
Smallamountofwaterhasgotinsidethe
watchduetodeteriorationofthegasket,etc.
Solution
Referencepages
Checkifthe date issetto thecorrect preliminary position. If not,
correctthepreliminarypositionfordate.
page144
Sufficientlychargethewatch until itstartsmoving atone-second
intervals.
page110
Waitforawhilewithoutdoinganything.
Leave the watch as it is for a while. The watch resumes regular
movement. Ifthe crownis pulled out,push itbackin.Afterawhile,
carryoutthesettingproceduresagainfromthebeginning.
Contacttheretailerfromwhomthewatchwaspurchased.

Table of Contents

Related product manuals