Seiko 7B24 - SettingThePreliminaryPositionsOfTheHourAndMinuteHandsManually

146
■ Settingthepreliminarypositionsofthehourandminutehandsmanually
Whensettingthepreliminarypositionofthe
hourandminutehandsrightaftersettingthe
preliminarypositionofthedate,aftercompleting
procedure“2”ofpreliminarypositionsettingof
thedateonpage145,gotoprocedure“2.”
No button operation is needed if setting the
handstothepreliminarypositionsautomatically.
→  Automatichandpositionalignment
functiononpage142
C o n d u c t  t h e  f o l l o w i n g
p ro c e d u r e s w h e n s e t t i n g
the hour and minute hands
manually.
Thewatchentersthemodetoadjustthepreliminarypositionofthe
date.
PressandholdButtonAandButtonB
simultaneouslyuntilthesecondhandstops
atthe13-secondposition(forfourseconds).
1
ButtonA
ButtonB
PresstheButtons
Simultaneously
forFourSeconds
※P r e s s  B u t t o n  B
w i t h  a  p o i n t e d
object.→page90
※
Neverpullthecrownout.
※ Inordertoperformthe
procedureseasily,itis
recommendedtofirst
pressandholdButtonB,
andthenpressButtonA.
・ Whiledatesareadvancing,nobuttonoperationcanbemade.
・  Afterthedatestops,whenthewatchhasnooperationandnomovementof
thehandsfortensecondsorlonger,itautomaticallydisplaysthetimeagain.
・ Whenitisinthemiddleofoperation,re-attempttheoperationfromprocedure“1.”
Troubleshooting