Seiko 7B24 - Manual Time and Date Setting

Pullingthe
Crowntothe
SecondClick
※ Whenthewatchentersthemanualtimesetting
mode,thereceptionresultswillbeindicatedas
“N,”sincethereceptionresultsdatawillbelost.
※ Whenthecrownis
ascrewlocktype,
unlockit.→page91
■ Howtomanuallysetthetime
TheSecondhandmovestopointtothe
“Zerosecond”positionandthewatch
entersthemanualtimesettingmode.
Whenthewatchisusedcontinuously
inconditionsinwhichthewatchmay
beunabletoreceivearadiosignal,it
canbemanuallyadjusted.
※ Whenthewatchisunabletoreceivearadiosignal,itcanmovedependingon
normalquartzmovement(accuracyofloss/gain:±15secondspermonth).
・ Whenadjustingthetime,thedatewillbe
accordinglyadjusted.
・ Whenthewatchreceivesaradiosignalafter
manualadjustmentofthetime,itdisplaysthe
receivedtime.
・ Whenusingthewatchagaininregionsinwhich
thewatchisabletoreceivearadiosignal,itis
recommendedtoperform“Manualreception.”
 → Howtoconductmanualreceptiononpages136-137
Conditionsinwhichthewatchmaybeunabletoreceiveradiosignals
138
Pullingthecrowntothesecondclick
1
Troubleshooting