Seiko 7B24 - Page 77

Goontothenextpage
157
Troubleshooting
Thesecondhandwillstartto
movefrom0:0:0AM
Whenallthehandsreturntothezero
secondposition,pushthecrownbackin.
3
Push
thecrown
backin
※ Whenthecrownis
ascrew locktype,
unlockit.→page91
※Ifthesecond handdoesnotstart to
movefrom“0:0:0 AM,”theresetting
of the Built-in IC may not activate.
Insuchacase,re-attemptthe
operationfromtheprocedure“2.”
Thewatchentersthemodetoadjustthe
preliminarypositionofthedate.
PressandholdButtonAandButtonB
simultaneouslyuntilthesecondhandstopsat
the13-secondposition(forfourseconds).
4
ButtonA
ButtonB
■ Adjustingthepreliminarypositionofthedate（④～⑤）
・ Whenthewatchhasnooperationfortensecondsor
longer,themodeautomaticallyterminates.
・ Whenitisin themiddleofoperation, re-attempt
theoperationfromprocedure“4.”
※
Neverpullthecrownout
PressButtonAand
ButtonBsimultaneously
forfourseconds