Seiko 8X53 - How to Use an Adjustable Three-Fold Clasp

38
ASTRON 8X53 GPS SOLAR
TO PRESERVE THE QUALITY OF YOUR WATCH
CONTENTS
6
1 2
How to use an adjustable three-fold clasp
1
3
2
4
Press the button on both sides of
the flap ; pull the buckle up.
The band will automatically come
out of the loop.
With pressing buttons on both sides
of the flap, pull the leather band
out of the moveable loop and fixed
loop. Then open the clasp.
Pull the pin out of a adjustment hole
of the band.
Slide the band to adjust its length
and find an appropriate hole. Place
the pin into the hole.
Place the tip of the band into the
moveable loop and fixed loop, and
fasten the clasp by pressing the
frame of the buckle.
Press the push buttons again to
unfasten the flap.
Fasten the flap.
Some bands are provided with an
adjustable three-fold clasp.
If the clasp of the watch you purchased is
as follows, please refer to the following
instructions.
●
How to wear or take off the watch
●
How to adjust the length of the leather band
 The above illustrations are provided as examples.
Some details may differ depending on the model.
Push button
Flap
Buckle
Moveable loop
Fixed loop
Push button
Flap
Buckle
Moveable loop
Fixed loop
Pin
Adjustment hole