25
ASTRON 5X53 GPS SOLAR
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
4
Push the crown back inPull out the crown to the first click
1
The second hand moves to display the currently set time zone.
The indicator hand indicates DST (Daylight Saving Time) setting.
3
Check the time zone and DST (Daylight Saving Time) settings
<
Display of the indicator hand
>
Displays the status for DST
(Daylight Saving Time).
To change the time zone setting
• When you are in a place
where GPS signals can be
easily received
How to adjust the time
zone P.20
• When you are in a place
where GPS signals cannot be
received
How to manually set the
time zone P. 2 3
For the relationship between
the second hand position and
time zone, refer to the “Time
zone display and list of time
zones around the world P. 1 2 .”
Pull out the crown to the second click
2
The second hand moves to display the currently set time
zone of the sub-dial. The indicator hand displays the
status of DST (Daylight Saving Time) for the sub-dial.
The second hand returns to the time
display mode.
The indicator hand returns to the
display of charging status.
<
Display of the indicator hand
>
Displays ON/OFF setting of DST
(Daylight Saving Time).
Changing the time zone
settings for the sub-dial
How to manually set the
time zone of the sub-dial
P. 2 6
For the relationship between
the second hand position
and time zone, refer to the
“Time zone display and list
of time zones around the
world P. 1 2 .”
Hand
position
AUTO
(automatic)
ST
(OFF)
DST
(ON)
Display
“AUTO (automatic)” is set when the main-
dial and sub-dial are switched after your
watch successfully adjusts the time zone
in a region that has adopted DST (Daylight
Saving Time).
The sub-dial automatically changes due to
your watch adapting to the implementation
of DST (Daylight Saving Time) for the time
zone (region) set for the sub-dial.
“AUTO (automatic)” is set when your
watch successfully adjusts the time zone
in a region that has adopted DST (Daylight
Saving Time).
The basic time automatically changes
due to your watch adapting to the
implementation of DST (Daylight Saving
Time) for the time zone (region) set for the
main-dial.
Hand
position
AUTO
(automatic)
ST
(OFF)
DST
(ON)
Display
Push
back in
Pull out
to the first
click
0 1 2 0 1 2
0 1 2
Pull out
the crown to
the second
click
Also the current time zone of the main-dial and the DST (Daylight Saving Time) can be checked by just pressing and releasing Button B.