52
ASTRON 5X53 GPS SOLAR
TROUBLESHOOTING
7
At trouble Possible causes Solutions
Reference
pages
Hand
Movement
The second hand moves at
2-second intervals.
The energy depletion forewarning function is activated.
(P. 33)
If the second hand moves at 2 or 5-second intervals while
you wear the watch everyday, the watch is in a condition
where it cannot acquire sufficient light, for instance, the
watch is concealed under a long sleeve shirt.
Charge the watch sufficiently until the second hand moves
at 1-second intervals and the indicator hand points to the
“middle” position or “full” position.
Be careful not to conceal the watch under a sleeve, etc., while wearing it.
When taking off the watch, place it in as bright a location as possible.
P. 1 3
P. 1 4
The second hand moves at
5-second intervals.
The stopped second hand
pointing to the 15-second
position started operating.
The power save function 1 has been activated (P. 34)
When the watch has not been exposed to sufficient
light continuously, the power save function 1 to limit
energy consumption is automatically activated.
When the watch is exposed to light, the hand will rapidly advance and return to
the current time.
When the watch returns to the current time, use it as is. (This is not an
abnormal movement.)
—
The stopped second hand
pointing to the 45-second
position started operating.
The power save function 2 has been activated (P. 34)
When the watch is not sufficiently charged for a
certain period of time, the power save function 2 is
automatically activated.
(1) Charge the watch until the indicator hand points to the “middle” position or
“full” position.
(2) After that, when the time is incorrect, adjust the time zone as necessary.
P. 1 3
P. 1 4
P. 19
~ 20
The watch hands advance
rapidly unless a button is
pressed. After the rapid
advancement is completed,
the watch resumes its
normal 1-second interval
movement.
The power save function has been activated. (P. 34)
The automatic hand position alignment function was
activated.
When the hand positions deviate to display incorrect
time as a result of external influences, etc., the
watch automatically corrects the hand misalignment by
the automatic hand position alignment function.
No operation is needed (this is not an abnormal movement).
—
The indicator hand
indicates the “LEAP SEC.”
The automatic leap second reception
function is operating. (P. 31)
It takes up to 18 minutes to receive the leap second data.
Pay attention to the reception place (Place where GPS signals can be easily
received P. 1 6 ).
P. 31
The indicator hand
continues to spin.
The indicator hand continues to spin while the date
changes (at 12:00 AM) and the automatic hand position
adjustment operates.
Use your watch as-is, without doing anything (this is not an abnormal
movement).
—
middle
position
Troubleshooting
To Next Page
Loading...
Need help?
General