32
ASTRON 5X53 GPS SOLAR
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
4
Press Button A and then release it while the result of the
reception is displayed (for 5 seconds) in step 2
3
Second hand: Reception result
(successful / failed)
The second hand and indicator
hand display the reception result.
The second hand displays the result of the GPS
signal reception (time adjustment or time zone
adjustment).
The indicator hand points to “1” or “4+” which
shows “time adjustment” or “time zone adjustment.”
The second hand displays the
result of the leap second data
reception (successful / failed).
The indicator hand displays “LEAP
SEC.” of the leap second data
reception.
Press Button A and then
release it
The result of the reception is displayed
1 2
Check the leap second data reception was successful
The reception result (success or failure) of the regular leap second data reception is displayed for 5 seconds.
Result
Successful Failed
Display
Position
Y 8-second
position
N 52-second
position
When the leap second data reception result
is Y (successful)
• The leap second data reception was
successful.
Use the watch as it is.
When the leap second data reception result
is N (failed)
• The leap second data reception, periodically
performed, has not been successful.
It will be performed automatically with the
next GPS signal reception (automatic time
adjustment, manual time adjustment or time
zone adjustment).
Use the watch as it is.
The leap second data is received on or after December
1
st
and June 1
st
.
Even when the leap second data reception has not
been successful, the time is correct until the leap
second data is added (deleted).
Move to the outdoors where GPS signals can be easily
received as necessary to receive GPS signals.
Place where GPS signals can be easily received/
Place where GPS signals cannot be received P. 1 6
The indicator hand points to “4+” as a result of time zone
adjustment.
Second hand: Reception result (successful / failed)
Result
Successful Failed
Display
Position
Y 8-second
position
N 52-second
position
After 5 seconds have elapsed or when Button B is
pressed, the watch returns to the time display mode.
Press
and then
release
Press
and then
release
When Button A is kept pressed,
the watch enters the Manual time
adjustment operation.
After 5 seconds have elapsed, or when
Button B is pressed, the watch returns
to the time display mode.
When Button A is kept pressed,
the watch enters the Manual time
adjustment operation.
To Next Page
Loading...
Need help?
General