Seiko Astron SSH109J User Manual

Pull out the crown to the
second click
Continue to press Button B (6 seconds)
until the second hand moves to the
0position, and then release it
Push the crown back in
(simultaneously with a time
signal)
1 2 3 4
46
ASTRON 5X53 GPS SOLAR
TROUBLESHOOTING
7
Operation has been completed.
The watch resumes its normal
movement.
The second hand moves to
display the sub-dial of the
currently set time zone.
 Although the second hand moves to the 36
seconds position after pressing Button B for
3 seconds, continue to press it.
The second hand moves to stop at the
0-second position.
The watch enters the manual time
setting mode.
Turn the crown to set the time
Turn the crown clockwise to
advance the time.
Turn the crown counter
clockwise to set back the
time.
Turn quickly to
move continuously.
Turn again to stop
moving.
0 1 2
0 1 2
0 1 2
Pull out
the crown to
the second
click
Press for
6 seconds
Push
back in
 When it has moved continuously for 12
hours, it will stop.
Turn the crown to continue setting.
 The point in which the date changes is at
0:00 AM (12:00 PM). Set the time taking
into consideration AM or PM.
 Even if GPS signals cannot be received, the watch can be used with the same accuracy as a
normal quartz watch. (at loss/gain ±15 seconds per month on average)
 If the watch receives GPS signals after manual time setting, it displays the received time.
How to manually set the time
• When using the watch again under a condition in which the watch is able to receive GPS signals, receive GPS signals to set the time.
• When adjusting the time, the date will also be adjusted.
 When the watch enters the manual time
setting mode, the reception result will be
displayed as “N,” since the reception results
data will be lost.
 Also the sub-dial is corrected in
accordance with the corrected
time at this time.

Seiko Astron SSH109J Specifications

General

Brand	Seiko
Model	Astron SSH109J
Category	Watch
Language	English