Press Button B and then release it Turn the crown to adjust the date to “1”
6 7
50
ASTRON 5X53 GPS SOLAR
TROUBLESHOOTING
7
Adjust the date to display “1.”
If “1” appears for the date, go to operation
8
During movement of the date, the buttons cannot be
operated.
The watch enters the mode to adjust the
preliminary position of the date (and the
indicator hand).
The second hand stops at the 18-second
position.
The indicator hand moves and the automatic
hand position adjustment is done, indicating
the “full” position. When doing so, it moves
clockwise or counterclockwise; however, this is
not a malfunction. Furthermore, the indicator
hand continues to spin and stops to indicate
the preliminary position for the date. The date
moves by the indicator hand rotating.
Turn the crown quickly to
move it continuously. Turn
the crown again to stop.
Turn the crown clockwise to
advance 1 day.
Turn the crown
counterclockwise to go back
1 day.
Press
and then
release
Continued on the
following page
To Next Page
Loading...
Need help?
General