EasyManua.ls Logo

Seiko C-21 - How to Manually Set the Day of the Week

Seiko C-21
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Button A
Press for
2
seconds
Button A
Press for
2
seconds
2
Keep pressing down the Button A (for 2
seconds) until the seconds hand moves to
point to the 55-second position.
3
Keep pressing down the Button A (for 2
seconds) until the seconds hand moves to
point to the 13-second position.
The watch enters the manual date setting mode.
EN
76
7
TROUBLESHOOTING
Button B
Press
0
1
Push the
crown
back in
4
Press the Button B to set the date.
To advance a
date
Press button once and then release it.
Continuous
Advance
Keep pressing down the button for
longer than 2 seconds. Press the button
once again to stop.
*
The hands do not move by turning the crown.
*
While the date is moving, the button cannot be operated.
*
Set the date by advancing the date. The date cannot be
reversely moved.
5
Push the crown back in.
The operation is completed.
*
When the crown is a screw lock type, lock it. P.14
EN
77
7
TROUBLESHOOTING
How to manually set the day of the week
The day of the week can be adjusted independently regarding of the time or the date.
To use the watch in a radio signal receivable condition again, conduct automatic signal reception to set the day of
the week. “Automatic reception and manual reception” P.18
* When the watch receives radio signals after the day of the week is manually adjusted, it displays the day of the week received
from the radio signals.
* If the day of the week remains incorrect even after a successful radio signal reception, the preliminary position of the day hand
may be misaligned.
“Setting the preliminary position of the date, day hand, hour and minute hands” P.82
EN
78
7
TROUBLESHOOTING
0
1
2
Pull out the
crown to the
first click
Button A
Press for
2
seconds
1
Pull out the crown to the first click.
The seconds hand rotates until it points to the 30-second
position and stops.
Both the main watch and the sub dial continue to operate.
*
When the crown is a screw lock type, unlock it. P.14
2
Keep pressing down the Button A (for 2
seconds) until the seconds hand moves to
point to the 55-second position.
The watch enters the manual day of the week setting
mode.
EN
79
7
TROUBLESHOOTING

Table of Contents

Related product manuals