1
1. INTRODUCTION
This manual describes how to handle the thermal printer MP-B20 (hereinafter referred to as the printer),
cradle CDL-B01K-1 (optional accessory; hereinafter referred to as the cradle), battery pack
BP-B0326-A1 (installed in the printer at the factory shipment; hereinafter referred to as the battery pack),
and battery pack BP-B0326-B1 (optional accessory; hereinafter referred to as the battery pack).
Read through "2. SAFETY PRECAUTIONS" and "3. OPERATING PRECAUTIONS" carefully before
using the products, and handle them safely and properly.
Keep this manual in a place where it can be accessed quickly.
See "MP-B20 SERIES THERMAL PRINTER TECHNICAL REFERENCE" for more detailed function and
specifications on the printer.
This manual consists of the following sections.
1. INTRODUCTION ........................................................................................................... 1
2. SAFETY PRECAUTIONS .............................................................................................. 2
3. OPERATING PRECAUTIONS....................................................................................... 6
4. PREPARATION.............................................................................................................. 9
5. IDENTIFYING MODEL TYPE ...................................................................................... 11
6. EACH PART OF PRINTER .......................................................................................... 12
7. LED DISPLAY OF PRINTER ....................................................................................... 14
8. CHARGING BATTERY PACK ..................................................................................... 17
9. THERMAL PAPER SETTING ...................................................................................... 22
10. TEST PRINT ................................................................................................................ 26
11. FUNCTION SETTINGS ............................................................................................... 28
12. CONNECTING TO HOST DEVICE ............................................................................. 31
13. ATTACHING/DETACHING BELT CLIP ....................................................................... 33
14. ATTACHING CRADLE ................................................................................................. 34
15. REPLACING BATTERY PACK .................................................................................... 36
16. PRINTER MAINTENANCE .......................................................................................... 38
17. TROUBLESHOOTING ................................................................................................ 39
18. SPECIFICATIONS ....................................................................................................... 40
19. ACCESSORIES AND CONSUMABLE PARTS ........................................................... 42
20. MS SETTINGS LIST .................................................................................................... 43
To Next Page
Loading...
Need help?
General
