Seiko MP-B20 SERIES User Manual

26
10. TEST PRINT
The printer can perform a test print.
In the test print, the firmware version, setting values of the function settings, etc. are printed.
 Test Print Procedure
1. Install the thermal paper in the printer as instructed in "9. THERMAL PAPER SETTING".
Ensure that no error occurs, and then turn off the printer.
2. Press the POWER Switch while holding down the FEED Switch. Release the POWER Switch first.
When the test print is started, release the FEED Switch.
Figure 10-1 Test Print Sample
Figure 10-2
Bluetooth Information Printing Sample
Table 10-1
Bluetooth Interface Information
Item Description
Printer Name
Bluetooth Device Name
Address
Bluetooth Address
iOS Auto Connection
Selected iOS Auto Connection
Security Mode
Selected Security Mode
Inquiry Response
Selected Searching Mode
AssocModel
Selected Association Model
* Bluetooth Communication *
* Printer Name:
MP-B20
* Address: XX:XX:XX:XX:XX:XX
* iOS Auto Connection: Enable
* Security Mode: SSP
* Inquiry Response: Pairing Mode
* AssocModel:Just Works

Seiko MP-B20 SERIES Specifications

General

Brand	Seiko
Model	MP-B20 SERIES
Category	Printer
Language	English