Seiko SSC141P1 - Troubleshooting and Maintenance; Improper Function Reset; Rotating Bezel Operation

25
English
English
24
IMPROPER FUNCTION
When an abnormal display appears, follow the procedures below to reset the built-
in IC. The watch will resume its normal operation.
<HOW TO RESET THE IC>
ALARM
MIN.
15 45
30
30
60
3
9
6
12
60
55
05
10
15
50
45
30
25
20
35
40
60
1. Pull out the crown to the second
click.
2. Keep pressing down Button A and
B for 3 seconds or longer.
3. Push the crow n b a ck into the
normal position and check if the
small second hand moves as
normal.
ROTATING BEZEL (for models with rotating bezel)
l
The rotating bezel can show up to 60 minutes of elapsed time.
1 Turn the rotating bezel to align its " "
mark with the minute hand.
Note:Forsomemodels,therotatingbezelrotatesonlycounterclockwise.
Start
Elapsedtime
2 Read the number on the rotating bezel
that the minute hand points to.
30minuteshave
elapsed.
B
A
CROWN
• ResettingtheICwillinitializethewatch.Beforestartingtousethewatch,itwillbe
necessarytosetthetimeandadjusttheSTOPWATCHhandstothe“0”position.
Referto“SETTINGTHETIMEANDADJUSTINGTHESTOPWATCHHAND
POSITION”sectionofthismanual.