Seiko V175 - Setting the Date; Stopwatch

15
English
English
14
SETTING THE DATE
l Before setting the date, be sure to set the main time.
Unlock.
t
Pull out to the first click.
t
Turn clockwise until the desired date
appears.
t
Push back into the normal position.
t
Screw all the way in until it is locked.
Date
1. ItisnecessarytoadjustthedateattheendofFebruaryand30-daymonths.
2. Donotsetthedatebetween9:00p.m.and1:00a.m.Otherwise,thedatemaynotchangeproperly.
CROWN
STOPWATCH
l The stopwatch can measure up to 60 minutes in 1/5-second increments.
When the measurement reaches 60 minutes, the stopwatch automatically
stops.
l Split time measurement is available.
I
Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the STOPWATCH hands are reset to the "0" position.
STOPWATCH minute hand
STOPWATCH 1/5-second hand
• IftheSTOPWATCHhandsdonotreturntothe“0”positionwhenthestopwatchisreset
to“0,”followtheprocedurein“SETTINGTHETIMEANDADJUSTINGTHESTOPWATCH
HANDPOSITION”.
• Whilethesecondhandismovingat2-secondintervals,thestopwatchcannotbeactivated.
Thisisnotamalfunction.See"ENERGYDEPLETIONFOREWARNINGFUNCTION"and"HOW
TOCHARGEANDSTARTTHEWATCH".
A
B