Sekonic LITEMASTER PRO L-478 Series - Accompanying Accessories

5. Setting Measuring Mode
Different measuring modes can be selected to meet various requirements.
★
In the custom setting, you can select whether to display or hide
the measuring modes.
Currently selected
measuring mode
Return to measuring
screens after selecting
any of icons.
[Measuring Mode Selection]
71
2
3
4
5
6
9
10
8
About Measuring Modes
No. Explanation
1
Ambient light T (shutter speed) priority mode
Displays F-stop value (aperture) for input shutter speed and ISO values.
2
Ambient light F-stop (aperture) priority mode
Displays shutter speed value for input F-stop and ISO values.
3
Ambient light TF (shutter speed and F-stop) priority mode
Displays ISO sensitivity for input shutter speed and F-stop values.
4
Ambient light HD Cine mode
Displays F-stop value for input shutter speed, frame rate and ISO values.
5
Ambient light Cine mode
Displays F-stop value for input frame rate, ISO and shutter angle values.
6
Ambient light Illuminance (lux or fc) mode (Incident light measurement)
Displays brightness value in lux or foot-candle unit.
Ambient light Luminance (cd/m2 or fl) mode (Reflected light measurement)
Displays brightness value in cd/m2 or foot-lambert unit.
7
Cordless flash mode
Detects ash brightness without meter-ash connection after Measuring button pressed to
arm meter for 90 seconds and ash red separately, and displays F-stop value.
8
Cordless multi (cumulative) flash mode
Detects and accumulates ash brightness without meter-ash connection after Measuring button
pressed to arm meter for 90 seconds and ash red separately, and displays F-stop value.
9
Cord flash mode
Detects ash brightness with synchro cord meter-ash connection, and displays F-stop value.
10
Cord multi (cumulative) flash mode
Detects and accumulates ash brightness with synchro cord meter-ash connection, and
displays F-stop value.
11
Radio triggering flash mode (*2) L-478DR Series only - Detects ash brightness without
meter-ash connection after radio transmitted trigger signal is received by radio-receiver con-
nected ash. Displays F-stop values (apertures numbers) for input shutter speed and ISO values.
12
Radio triggering multi (cumulative) flash mode (*2) L-478DR Series only - Detects and
accumulates ash brightness without meter-ash connection after radio transmitted trigger
signal is received by radio-receiver connected ash. Displays F-stop values (apertures numbers)
for input shutter speed and ISO values.
11
12
[Measuring Screen]
Tool Box
(
*2
)
L-478DR
series only