Need help?Do you have a question about the Selco GENESIS 164 TLH and is the answer not in the manual?
Protects individuals from welding hazards like radiation, noise, and heat.
Measures to prevent fires and explosions from welding processes.
Safeguards against inhaling noxious welding fumes and gases.
Guidelines for placing the welding power source safely and accessibly.
Instructions for correctly installing the welding apparatus.
User's responsibility for evaluating and managing EMC issues during installation and use.
Techniques for minimizing electromagnetic emissions from the welding power source.
Describes the indicators and controls on the front of the welding machine.
Details the components and features located on the rear of the welding machine.
Instructions for connecting the welding machine to the electrical power supply.
Guidance on connecting various components of the welding equipment.
Details the MMA welding process, including preparation, electrode choice, and arc control.
Explains the TIG welding process, focusing on arc striking, control, and weld quality.
General| Input voltage | 230 V |
|---|---|
| Input current | 16 A |
| Welding current range | 5 - 160 A |
| Duty cycle | 60% at 160A |
| Protection class | IP23 |
| Welding process | MMA, TIG |
To Next Page