Need help?Do you have a question about the Select Engineered Systems TEC1A Series and is the answer not in the manual?
Safety recommendations for installing TEC1A product enclosures, covering hazardous events, voltage, wet locations, and telephone lines.
Requires coordination with the telephone company for Touch-Tone line, providing ringer equivalence and FCC registration numbers.
Shows recommended installation heights for TEC1A series access controllers for pedestrian and drive-up applications.
Instructions for mounting the TEC1A back-box using the provided holes for surface installation.
Instructions for cutting a wall opening to mount the TEC1A flush with the wall surface.
Advises using an optional weather hood for stand-alone installations to protect against rain and snow.
Specifies sealing all openings and penetrations of the TEC1A enclosure with RTV silicon sealant.
Details the mandatory grounding requirement for the TEC1A, connecting to earth ground potential via cold water pipe.
Provides an overview and identification of key components and connection points on the TEC1A main board.
Explains terminal strip connections (P1 and P1A) for user inputs, outputs, and the door ground stud.
Instructions for connecting the TEC1A to the telephone network using the supplied RJ-11 cable, with FCC warnings.
Details the two methods for powering the TEC1A: using a supplied transformer or an external 12v DC source.
Explains the use of VOLT-FREE (dry) contacts for Request to Exit (Rex) inputs on connector P1.
Describes the relay connections on connector P1A, including normally open and normally closed contacts and their ratings.
Lists the three optional expansion cards (MUI, Comm, 2-Reader) and where to find installation instructions.
Step-by-step guide on how to program a directory record, including name, phone number, and PIN, using the keypad.
General| Brand | Select Engineered Systems |
|---|---|
| Model | TEC1A Series |
| Category | IP Access Controllers |
| Language | English |
To Next Page
