Select Engineered Systems TEC1A Series - Installation Heights; Surface Mount; Flush Mount; Optional Weather Hood Recommendation

TEC1A Installer Guide
01/20
Rev B2
Page 4 of 11
1.2 Coordination with Telephone Company
Installation of TEC1A requires coordination with your telephone company.
A Touch-Tone™ line is required for dialing out purposes – legacy pulse dialing is not
available.
The phone company may require the following information:
 The ringer equivalence number (see label inside TEC1A enclosure).
 The FCC registration number (see label inside TEC1A enclosure).
 The desired location of the telephone jack (must be given to the phone company
at the time the phone line is ordered).