SelectBlinds CORDLESS - OPERATION; UPSTOP ADJUSTMENT (IF NECESSARY)

5
OPERATION
To lower the shade simply pull down on the bottom rail, stopping when you’ve
reached the desired level.
To raise the shade, gently pull down on the bottom rail and release. e shade
will automatically retract.
UPSTOP ADJUSTMENT (IF NECESSARY)
Retract the shade and let it stop at the top. If you do not like where the upstop is
set, it can be adjusted by removing the shade, rolling the fabric up by hand and
reinstalling the shade.
To remove the shade, press the tab on the bottom of the right bracket toward the
center of the shade (1).
Slide the right bracket insert down out of the right bracket (2). e le end of
the shade can now be removed from the le bracket (3).
1
2
3