What to do if the indicator light on SelectBlinds CORDLESS remote does not shine?
If the indicator light on your SelectBlinds Window Blinds remote isn't shining or the remote's range is reduced, replace the battery (CR2430).
Why does the SelectBlinds CORDLESS motor continue to run in one direction?
If the motor for your SelectBlinds Window Blinds continues to run in one direction, the limit setting was unsuccessful and needs to be reset.
How to fix SelectBlinds CORDLESS motor that does not work?
If the motor for your SelectBlinds Window Blinds does not work or runs slowly, recharge the motor.
Details for installing brackets for inside shade mounts.
Guidance on using optional spacer blocks for bracket mounting.
Steps to adjust the shade's upper travel limit if needed.
Specific bracket placement for shades equipped with a head rail.
Detailed requirements for inside mounting, including depth.
How to use optional spacer blocks for outside mounting.
Using optional extension brackets for added clearance.
Steps for mounting shades on the side of the window frame.
Bracket placement for inside mounts with fascia/no head rail.
Bracket placement for outside mounts with fascia/no head rail.
Using extension brackets for fascia/no head rail shades.
Specific instructions for side mount shades with fascia/no head rail.
Procedure for attaching head rail shades to brackets.
Procedure for attaching shades with fascia/no head rail.
Explanation of the tension device and its purpose.
Information regarding permanent safety labels on the shade.
Basic operation instructions for shades with cords.
Troubleshooting steps for shade skewing issues.
Specific steps to remove shades with a head rail.
Specific steps to remove shades with fascia or no head rail.
Bracket placement for motorized shades with head rails.
Requirements for inside mounting motorized shades.
Using optional spacer blocks with motorized shades.
Using optional extension brackets for motorized shades.
Mounting motorized shades on the side of the window frame.
Attaching motorized shades with head rails to brackets.
Attaching motorized shades without head rails to brackets.
Steps to link a 5-channel remote to the shade.
How to use the 5-channel remote for shade control.
How to use the timer remote for shade control.
Steps to define a preferred shade position.
How to recall a pre-set favorite shade position.
How to set the current time and day on the timer remote.
Technical requirements for setting up the Smart Controller.
Common issues encountered during Smart Controller setup.
Information on integrating the Smart Controller with other smart home devices.
FCC and IC compliance details for the Smart Controller.
General| Brand | SelectBlinds |
|---|---|
| Model | CORDLESS |
| Category | Window Blinds |
| Language | English |
To Next Page