9
OPERATION
5 CHANNEL REMOTE
Select the desired channel with the CHANNEL buttons. e channel indicator
light will illuminate the channel that is on. If all 5 lights are lit, the remote will
control all 5 channels at once.
Tapping the UP or DOWN buttons for less than 2 seconds will move the shade in
short steps. Holding the UP or DOWN buttons down for more than 2 seconds
before releasing will operate the shade in the faster standard speed.
TIMER REMOTE
Shades can be manually operated while in manual mode. Tap the MODE button
until you see “MANUAL” in the display.
Select the desired channel with the CHANNEL
button. e channel will show in the display
screen. If all 6 channel numbers are shown, the
remote will control all 6 channels at once.
Press the UP or DOWN buttons to raise or
lower the shade.
Press the STOP button to stop the shade anywhere along the travel.
Note: e timer remote does not have ne adjustment capability (jog function).
00:00
MANUAL
Press the UP or DOWN buttons to raise or lower the shade.
Press the STOP button to stop the shade anywhere along the travel.
To Next Page
Loading...