MENUS CONTROL
PC SETTINGS
when choose the PC menu, the screen appear as :
Brightness
Contrast
User-R
PC
Scale
Color temp
Picture mode
MENU:EXIT:AdJ
:SEL
User-G
User-B
Personal
Standard
Normal
when you connect VGA cable to the jacks of PC and select the
signal source as "VGA" the screen menu will active. You can
use the function to adjust the display setting automatically or
manual .
1.CONTRAST: press "VOL+/-" button to adjust the contrast
of PC .
2.BRIGHTNESS: press "VOL+/-" button to adjust the
brightness of PC .
3.COLOR TEMP: press "VOL+/-" button to adjust the color
temp of PC. Which can choose "PERSONAL, STANDARD,
WARM, COOL" .
4.USER-R: press "VOL+/-" button to adjust the red of PC .
5.USER-G: press "VOL+/-" button to adjust the green of PC
6.USER-B: press "VOL+/-" button to adjust the blue of PC .
7.SCALE: press "VOL+/-" button to scale the size of PC, which
can choose " FULL, 4:3" .
8.PICTURE MODE: Press "VOL+/-" button to adjust the picture
mode of TV, which can choose "Personal, Standard, Bright,
Soft" modes.
GEOMETRY SETTINGS
when choose the GEOMETRY menu, the screen appear as :
V-Position
H-Position
Phase
Auto size
GEOMETRY
Clock
MENU:EXIT:AdJ
:SEL
37
45
27
30
when you connect VGA cable to the jacks of PC and select the
signal source as "VGA" or "YPBPR" the screen menu will active.
You can use the function to adjust the display setting
automatically or manual.
1.H-Position: press "VOL+/-" button to adjust the H-Position
of television the screen appear as .
2.V-Position: press "VOL+/-" button to adjust the V-Position
of television the screen appear as.
3.COLCK: press "VOL+/-" button to adjust the updating
frequency of the picture.
4.PHASE: press "VOL+/-" button to adjust the phase of the picture.
5.AUTO SIZE:press "VOL+/-" button to auto adjust PC size
and position.
15
To Next Page
Loading...
General