11
A) How to prepare the cable?
Step 4: Antenna Pointing Menu
Once all connected, turn on the TV and the
Satellite receiver.
Select the Antenna Pointing Menu on your set
top box.
This image shows the Signal level and the
screen you will see on your TV.
Do not forget to choose “LNB : ON”
You will need someone to stay in front of the TV
to tell you when the signal is “good” while
you’re outside trying to adjust the antenna the
best way possible.
It is important that the coaxial cable does not become damaged or Kinked
during the installation procedure.
B) How to connect the cable to the antenna and the set top box?
One side
To Antenna
Other side
To receiver
Cable
15mm
CONNECTOR COVER
F CONNECTOR
8mm
3mm
Antenna Pointing Menu
Signal: 0
Satelite : ASTRA 1
Transponder : 23
LNB : ON
Polarisation : Horizontal
Frequency : 12640
To Next Page
Loading...
Need help?
General