Selmo Dynamic - Functional Characteristics

Selmo
Comfort technology
division
“Dynamic”
Electronic control for towel heaters
Rev. Beta
-
March 2018
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano (PD) Italy- Tel 049.8976761, Fax 049.8976085 - www.selmo.it
EN
Functional characteristics
Function mode: Comfort, Night, Antifreeze, Fil-pilote, Chrono, Timer 2h, Stand -by.
-
In ‘’Comfort’’ mode:
the electronic control maintains the set temperature at the value set by the user.
-
In ‘’Night’’ mode:
the electronic control maintains the ambient temperature at an inferior value respect at
‘’Comfort’’ temperature.
-
In ‘’Antifreeze’’ mode:
the electronic control maintains the temperature over 7°C.
-
In ‘’Fil-Pilote’’ mode:
the electronic control operation is decided by the signal sent by the ‘’Fil-Pilote’’ system.
-
In ‘’Timer 2h’’ mode:
the electronic control activates the heating element for 2 hours, unconditionally by
set temperature. At the end of this period, the thermostat operates again with the
previously set mode. During the 2 hours, for security reasons, the ambient temperature
can’t go higher than 32°C.
-
In ‘’Chrono’’ mode :
the electronic control operates according to a daily program with weekly repetition,
the program can be setted by the user.
-
In ‘’Stand-by’’ mode:
the heating element is deactivated but the electronic control is operative.
Other information:
-
Big backlight display shows: hour, setted temperature and function/mode.
-
3 presetted daily programs and 1 program settable by the user.
-
‘’Open window detection ’’ Function: this function deactivates the heating element
for a max of 30 mins if there is an open window in the room, allowing an energetic saving.