Selmo Dynamic - User Manual

Selmo
Comfort technology
division
“Dynamic”
Electronic control for towel heaters
Rev. Beta
-
March 2018
Selmo
Electronic
Via Pacinotti, 24 - 35030 Rubano (PD) Italy- Tel 049.8976761, Fax 049.8976085 - www.selmo.it
EN
Dynamic is an advanced digital thermostat
for electric towel with fluid heat transfer and
control of environmental
temperature through ambient sensor.
Dynamic is composed by a fixed unity
(placeable in the left or in the right of the
towel warmer) and its provided of a
particular heating element that can rotate
his body of 350°.
the backlight display offers a wide visual of
information about time , mode and
temperature.
Dynamic is a certified product.
Dynamic is according to directives:
Available colors: - White
- Chrome
-Eco-design Directive for Energy-using Products, 2005/32/EC (<0,5W).
EN 62233:2008
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + IS1:2007 + A2:2008 ===> Cat. 2
EN 61000-3-2:2014
EN 61000-3-3:201

Summary

Product Overview and Characteristics

Functional Characteristics

Details the various operational modes and user-selectable functions of the thermostat.

Product Description

Explains the advanced digital thermostat technology and ambient sensor control.

Technical Features

Safety and Installation

Safety Precautions

Key warnings for electrical shock, device handling, and general safety.

Installation Instructions

Step-by-step guide for the correct installation of the thermostat and heating element.

Fil-Pilote System Connection

Operation and Modes

On;Stand-by Control

Procedure for turning the unit on, off, or activating the standby mode.

Comfort and Night Modes

Setting and using specific temperature levels for Comfort and Night modes.

Operative Mode Selection

Guide to selecting modes like Antifreeze, Timer 2h, and Fil-Pilote.

Chrono Mode Programming

Steps for setting the current time and programming daily/weekly schedules.

Advanced Functions

Key Lock Feature

Locks the keypad to prevent accidental changes to settings.

Energy Saving Functions

Details Open window detection, ASC, and ECO modes for energy efficiency.

Assembly Procedures

Assembly Without Resistance Elements

Steps for assembling the unit when heating elements are supplied separately.

Heating Element Mounting

Instructions for physically attaching the heating element to the thermostat body.

Assembly With On-Board Elements

Steps for installing the thermostat on pre-assembled heating elements.

Heating Element Specifications

Product Disposal

Selmo Dynamic Specifications

General

Control Algorithm	PID, On/Off
Input Type	Thermocouple, RTD
Output Type	Relay, SSR
Communication	RS-485 Modbus
Power Supply	100-240VAC
Operating Temperature	0°C to 50°C