“Dynamic”
Electronic control for towel heaters
Electronic
Via Pacinotti, 24 - 35030 Rubano (PD) Italy- Tel 049.8976761, Fax 049.8976085 - www.selmo.it
Heating element mounting
1-
Place the resistive element in such a way that
the two rubber o-rings match with the
corresponding guides, in the plastic body of the
chrono thermostat.
2-
Connect the 2 Fast-on connectors to the
connectors previously indicated by the arrows;
press until you feel the joint.
3-
When both connectors are connected,
close the chrono thermostat cover, now
ready for use.
To Next Page
Loading...