20 | Instructions for use
EN
ADDITIONAL AND
SERVICE SETTINGS
No. Description Range
S1.12
MAXIMUM SETTING OF REQUESTED TEMP.
This setting determines maximum possible setting of
room temp.
4 ÷ 40 °C (30)
S1.13
TIME OF IGNORING ROOM TEMP. (RCD2 only)
Used with the »fireplace« function. Operation of fire-
place function is described in the chapter »Fireplace
Function«
1 ÷ 12 ur (5)
S1.14
ALTITUTE FOR WEATHER FORECAST
This setting enters the altitude of the room unit. This
improves precision of weather forecast.
0 ÷ 1999 m (300)
To Next Page
Loading...
