Sena 3S - Enabling;Disabling Voice Activated Phone Answering; Enabling;Disabling Voice Prompts on Sena 3 S; Delete All Bluetooth Pairing Information on Sena 3 S

3S
25
English
The voice prompts for each menu item are as below:
(1) VOX phone
(2) Voice prompt
(3) Delete all pairings
(4) Factory reset
(5) Exit conguration
Enabling/Disabling Voice Activated Phone Answering
Voice Prompt “VOX phone”
Factory Default
Enable
Enable / Disable
Press the (–) Button
If this feature is enabled, you can answer incoming calls by simply
saying a word loudly enough, unless you are connected to intercom. For
example, when you hear a series of beeps for an incoming call, you can
answer the phone by saying “Hello” or any other word loudly. However,
the phone VOX feature does not work if you are connected to intercom.
This is enabled from the factory but you can disable this. If this mode is
disabled, you have to press the (+) Button to answer an incoming call.
Enabling/Disabling Voice Prompts
Voice Prompt “Voice prompt”
Factory Default
Enable
Enable / Disable
Press the (–) Button
You can disable voice prompts by conguration setting, but the following
voice prompts are always on.
- Voice prompts for conguration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
Delete All Bluetooth Pairing Information
Voice Prompt “Delete all pairings”
Factory Default
N/A
Execute
Press the (–) Button
To delete all Bluetooth pairing information of the 3S, press the (+) Button
until you hear a voice prompt, “Delete all pairings”, and press the (–)
Button to conrm.