Sena IMPULSE - Helmet Fitting and Basic Operations; Basic Device Operations

Putting on the Helmet
①
Unfasten the chinstrap by using the retention system.
②
Expand the helmet opening with your hand, and slide your head
into the helmet.
③
Fasten the chinstrap as tight as possible without causing you pain.
Icon Legend
1x
TAP
Tap button the specified
number of times
10s
HOLD
Press and Hold button for the
specified amount of time
“Hello” Audible prompt
Basic Operations
Powering On
1s
HOLD
Volume Up
1x
TAP
Powering Off
1x
TAP
Volume Down
1x
TAP