Latitude S1 Smart Snow Helmet | 10
2 GETTING STARTED: BLUETOOTH SYSTEM
2.2 Button Function
Bluetooth System Buttons
Status LED
Jog Dial
Phone Button
2.3 Powering On and Off
Power On
=
1s
HOLD
Power Off
=
1x
TAP
2.4 Charging
Charge the Bluetooth System
Depending upon the charging
method, the Bluetooth system will
be fully charged in about 3 hours.
Note:
• Please make sure to take off your helmet while charging. The
Bluetooth system automatically turns off during charging.
• Any 3rd party USB charger can be used with Sena products if the
charger is approved by either the FCC, CE, IC or other locally
approved agencies that Sena accepts.
• The Latitude S1 is compatible with 5 V/1 A input USB-charged
devices only.
To Next Page
Loading...
