Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
RF Exposure Statement
This device complies with RF exposure requirement.
The distance between the antenna 1 of the dev
ice and the head surface is at
least 31.6mm and use 31.6mm or more. And the distance between the antenna 2
of the device and the head surface is at least 52.5 mm and use 52.5mm or more
To Next Page
Loading...
