Sena SR10 User Manual

16
6.3 Ports and Cables
The SR10 has one Main Port and two AUX ports for wired
connection with other devices.
Below is a list of compatible cables and devices:
•Main:6-pinHiroseconnectortypetwo-wayradiocable*
•AUX1:3.5mm3-poleaudiojackcableforGPS,radardetectors
orlaserdetectors**
•AUX2:3.5mm3-poleaudiojackcableforGPS,radardetectors
or laser detectors, or 3.5mm 4-pole mobile phone cables for
mobilephones*
Forinformationonmodelspecic6-pinHiroseconnectortypetwo-
way radio cables, please visit www.sena.com.
--------------------------------
*Notincludedinthepackage.Mustbepurchasedseparately.
**Includedinthepackage.

Sena SR10 Specifications

General

Profiles	HSP, HFP, A2DP, AVRCP
Operating Time	12 hours
Stand-by Time	10 days
Operating Temperature	-10˚C – 55˚C
Water Resistance	Water-resistant
Battery Type	Rechargeable Lithium Polymer Battery
Battery Life	12 hours
Compatibility	Bluetooth-enabled devices, including smartphones, GPS devices, and other communication devices