Sena SRL-EXT Quick Start Guide

Intercom Pairing
There are two ways to pair the headset.
Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the SENA
MOTORCYCLES App without remembering the button operation.
①
Pair the mobile phone with the headset.
②
Open the SENA MOTORCYCLES App and tap
(Smart
Intercom Pairing Menu).
③
Scan the QR code displayed on your friend (B)’s mobile phone.
• Your friend (B) can display the QR code on the mobile phone by
tapping
> QR code ( ) on the SENA MOTORCYCLES App.
④
Tap Save and check that your friend (B) is paired with you (A)
correctly.
⑤
Tap Scan (
) and repeat steps 3-4 to pair with Intercom Friends
(C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with
Sena products that use Bluetooth 3.0 or below.

Sena SRL-EXT Specifications

General

Audio Advanced Noise Control	Yes
Audio Built-in SBC Codec	Yes
Audio Wide Volume Control	Yes
Battery Charging Time	2.5 hours
Certificates	CE, FCC, IC
Music Sharing	Yes
FM Radio	Yes
Voice Command	Yes
Operating Temperature	-10°C to 55°C
Profiles	HFP, HSP, A2DP, AVRCP