Sena TUFFTALK - 3.2 Hard Hat Earmuff Type

Tufftalk
10
3.2 Hard Hat Earmuff Type
Right Speaker Cover
Short Antenna
Tufftalk Headset
3.2.1 Installing the Headset
1. Attach the headsets to each side of the hard hat by sliding them
into the left and right slots of the hard hat. The headset with the
microphone and the antenna should be mounted on the left side
of the hard hat.
2. Organize the cables under the hard hat suspensions.
Note:
If the rubber pad on the inner surface of the bracket-top begins to fray,
replace it with the included pad.