EN-6
EN
Vacuum Cleaner
SVC 45BK / SVC 45BL / SVC 45GR / SVC 45RD / SVC 45WH
Copyright © 2014, Fast ČR, a.s. Revision 11/2014
B
1
2
3
4
5
6
1 Parking position
2 Cover grill of the outfl ow fi lter
3 Power cord
4 Combination nozzle
5 Carry handle
6 Front wheel mechanism
ASSEMBLY
Insert the hose into the air suction opening
Press both the safety buttons on the end of the hose end and insert the hose end into the air suction
opening on the vacuum cleaner until you hear a “click”. The hose is now secured in correct position.
Attach the holder to the tube
Place the handle on the wider part of the assembled tube.
Attach the fl oor inlet nozzle to the tube:
Make sure the fl oor nozzle is attached the narrower part of the assembled tube.
INSTRUCTIONS FOR USE
Connecting your vacuum cleaner to the electrical power grid
Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the
cord is out of the product. Insert the plug into the wall outlet.
Note:
Yellow marking on the supply cable warns that the cable is close to its end. Do not pull the
cable more than to the red marking.
To Next Page
Loading...
Need help?
General
