22
Doc# 2016-25-05 Rev F Technical Support 678-208-3087 Ext #1 Airtext Installation Manual
Software Updates
A compatible PED with an active Dealer Mode subscription, and an active Send Solutions Dealer account
is required to perform software updates. To activate Dealer Mode, contact Airtext Product Support at
(678) 208-3087 extension #1. Request access to update Airtext firmware as a Send Solutions Dealer.
A detailed firmware update procedure is described in Appendix A of this document. In summary:
Turn on power to the Airtext router and enable the Airtext App. Clear view of sky and satellite
connection is NOT needed.
Open the Dealer menu and click to get the latest version of firmware from the Send Solutions servers and
put it on the phone while in WiFi or Cellular data plan range. Then click to send that firmware from the
phone to the router.
Older versions of firmware take a little over 15 minutes to update. Newer versions of the firmware
transfer in about 3 minutes.
CONTINUED AIRWORTHINESS
Maintenance of Airtext transceiver unit is on condition. No general maintenance, air filter cleaning, or
system monitoring is required.
To Next Page
Loading...