EasyManua.ls Logo

Send Solutions AirText - Certification; Limitations; Operation; Installation

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Doc# 2016-25-05 Rev F Technical Support 678-208-3087 Ext #1 Airtext Installation Manual
Certification
FAA STC Number: ST04269AT with PMA approval.
This device complies with DO-178B design assurance Level E.
Limitations
Operation
Airtext wireless system has been tested for interference. Its operation must not interfere with the proper
operation of any required aircraft equipment or systems. The installation requires the installer to verify
that there is no interference using the post-installation check-out procedure.
Installation
For preservation of essential equipment in aircraft with multiple power busses, Airtext should be powered
from a non-essential, shedable bus.
Installation Overview
Introduction
This section provides the equipment information for installing Airtext and related optional accessories.
Installation of Airtext should follow the data detailed in this manual. Cabling is typically fabricated by the
installing agency to fit each particular aircraft. Always follow acceptable avionics installation practices
per advisory circulars AC 43.13-1B and AC 43.13-2B or later FAA approved revisions.
Unit Hardware Configurations
Airtext is available with the following part numbers.
Model
Part P/N
Description
Installation Kit
Airtext 15G25 16 Text users Airtext Install
Airtext + 15G25-2 16 Text users and Voice Airtext Install
Airtext + 15G25-3 64 Text users Airtext Install

Table of Contents