Sennheiser AMBEO Max - Inputs and Outputs

Specifications
AMBEO Soundbar | Max | 55
Inputs/outputs
Remote control, model: SB01-RC
WiFi
HDMI TV (eARC) OUT default: HDMI 2.0a, eARC (HDMI 2.1)
control: CEC
video formats: up to 4K (60 Hz), Full
HD, MHL 2.1
encryption: HDCP 1.4
power supply for accessories
(external devices): 5 V
⎓, 1 A
HDMI 1 IN
HDMI 2 IN
HDMI 3 IN
default: HDMI 2.0a
encryption: HDCP 2.2
control: CEC
video formats: up to 4K (60 Hz),
Full
HD, MHL 2.1
HDR formats: Dolby Vision Pass-
Through
OPT IN S/PDIF
supported sampling rates: up to
192
kHz
AUX IN stereo RCA sockets
USB USB socket (type A), for power supply
for accessories (external devices):
5
V ⎓, 1 A; service socket for updates
ETHERNET RJ-45 socket, 100/10 MBit
Subwoofer SW Pre-OUT mono RCA, max. 2 V
Microphone input for room
calibration
2.5 mm jack socket, mono
Transmission infra-red
Range approx. 8 m
Power supply coin cell, type CR2032, 3 V
Standard IEEE 802.11 a/b/g/n/ac
Transmission system 2 x 2 MIMO
Transmission frequency
(country-specific)
2,400 MHz to 2,483.5 MHz
5,170 MHz to 5,835 MHz
Modulation 2.4 GHz band CCK, DQPSK, DBPSK for DSSS
64QAM, 16QAM, QPSK, BPSK for
OFDM
Modulation 5 GHz band 64QAM, 16QAM, QPSK, BPSK
Output power 100 mW (max)