Connecting devices to the Soundbar
28 | AMBEO Soundbar | Max
Connecting an Ethernet cable
To connect the Soundbar to a wired network:
▷ Connect one connector of a network cable (with RJ-45 connector,
to be ordered separately) to the ETHERNET
socket on the Sound-
bar.
▷ Connect the other connector of the cable to the network socket of
your router.
You may have to make settings to your router.
Alternatively, the Soundbar can be connected to the Internet via
WiFi. For more information,
> 44.
LAN
AUX IN
SW PRE
OUT
OPT IN
HDMI 3 IN
HDMI 2 IN
HDMI 1 IN
HDMI TV
(eARC) OUT
ETHERNET
USB
POWER
Router
If you connect the Soundbar to the Internet/Ethernet via cable,
the WiFi function of the Soundbar is automatically deactivated.
To Next Page
Loading...
