Sennheiser Digital 6000 Series User Manual

Digital 6000
Quick Guide | Kurzanleitung | Guide rapide | Guida rapida | Guía de inicio
rápido | Guia rápido | Beknopte handleiding | Krótka instrukcja obsługi | Snabbguide |
Kort vejledning | Pikaohje | Γρήγορος οδηγός | Kısa Kılavuz | Краткая инструкция | 快速
指南| 快速使用指南 | クイックガイド | 요약 설명서|
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Printed in Germany, Publ. 10/18 581342/A01
SK 6212
Battery
Setup
On/Off
BA 62*
* to be ordered separately
Charge before
usage !
Update the firmware of the EM 6000 to v2.2 (or higher) in order for the SK 6212 to work
properly. The latest firmware is availabe here: www.sennheiser.com/digital-6000
ON + RF MUTE
long
ON
short
OFF
long
RF MUTE OFF
short
3 pin SE
581342_1018_A01_QG_SK_6212_PRT.pdf 1 25.10.2018 15:14:46

Sennheiser Digital 6000 Series Specifications

General

Adjacent Channel Selectivity	> 70 dB
Blocking	> 80 dB
Modulation	Digital
Audio Outputs	XLR
Ethernet	Yes
Operating Temperature	-10 °C to +55 °C
Power Supply	12 V DC
Storage Temperature	-20 °C to +70 °C

Summary

Battery and Charging

Battery Model BA 62

Details the specific battery model required for the device, noted as separately orderable.

Charging Instructions

Essential instruction to charge the battery before the first use of the device.

Initial Setup and Connection

3-Pin SE Connector

Illustrates the correct connection of the 3-pin SE cable for device setup.

Powering the Device On and Off

Power Control States

Explains various power states: ON, ON + RF MUTE, RF MUTE OFF, and OFF.

Device Overview and Controls

Operating Elements

Identifies and describes the physical buttons and LEDs on the device.

Home Screens

Displays common home screen layouts showing frequency, encryption, and battery status.

System Configuration and Status

Menu Navigation

Outlines the main menu structure for accessing settings like Frequency, Name, and Gain.

LED Status Indicators

Details the meaning of LED indicators based on battery life and signal status.

Auto Lock Functionality

Explains the Auto Lock feature, including states like Locked and Temp Unlock.