Need help?Do you have a question about the Sennheiser Digital 6000 and is the answer not in the manual?
General| Audio Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Dynamic Range | > 120 dB |
| Audio Outputs | XLR analog, AES3 digital |
| Power Supply | 12 V DC |
| Weight | 1.1 kg |
| THD | < 0.03% |
| Signal-to-Noise Ratio | ≥ 110 dB (A-weighted, RMS) |
| Output voltage | +18 dBu (max) |
| Ethernet | IEEE 802.3 |
| Operating temperature | -10°C to +55°C |
| Storage temperature | +70°C |
Overview of the EM 6000, SKM 6000, SK 6000, and L 6000 components.
Lists available product variants with frequency ranges and article numbers.
Details on charging modules, batteries, microphones, and antennas.
Guides for installing receivers, transmitters, and chargers.
Instructions for network setup using WSM software.
How to connect and configure word clock settings.
Operating the EM 6000 receiver, including menus and displays.
Operating the SKM 6000 handheld transmitter, including menus.
Operating the SK 6000 bodypack transmitter, including menus.
Procedures for setting up wireless connections and adjusting frequencies.
How to sync transmitter and receiver settings.
Best practices for antenna setup and placement.
Detailed technical data for system components.
Guidelines for cleaning and maintaining the Digital 6000 series.
To Next Page
