Sennheiser Digital 6000 - Em 6000 Dan

Installing the EM 6000
27
Product overview for the rear side of the EM 6000 DANTE
►
1 Power socket
• See “Connecting/disconnecting the EM 6000 to/from the power
supply system”
2 The Dante™ interface
• See “Outputting audio via a Dante™ network (EM 6000 DANTE only)”
3 Ethernet socket for controlling the device via the network and Sennhe-
iser WSM
• See “Connecting the EM 6000 to a network”
4 Digital Audio AES 3 digital audio output
• See “Outputting digital audio signals”
5 Word clock BNC sockets
• See “Connecting the word clock”
6 Bal AF out analog audio outputs for the CH 1 and CH 2 channels
• One XLR and 6.3 mm (1/4") jack per channel, transformer-balanced,
parallel
• See “Outputting analog audio signals”
7 BNC antenna inputs and BNC antenna outputs for cascading
• See “Connecting remote antennas”
• See “Connecting rod antennas”
• See “Recommendations for using antennas”