Installing the L 6000 | LM 6060 | LM 6061
56
Connecting the L 6000 to a network
You can monitor and control one or more L 6000s via a network connection
using Sennheiser Wireless Systems Manager (WSM) software.
The network does not have to be a homogeneous network including only
chargers. You can integrate the L 6000 into your existing network infra-
structure with any other types of devices.
►
To connect the L 6000 to a network:
▷ Connect a network cable with an RJ-45 connector (Cat5 at minimum)
to the Ethernet socket on the rear side of the L 6000.
►
For more information about controlling devices via the Sennheiser
Wireless Systems Manager (WSM) software, refer to the instruction
manual for the software.
To Next Page
Loading...
