Sennheiser Digital 6000 - Using the EM 6000

Using Digital 6000 series devices
60
Using Digital 6000 series devices
You can find information about using Digital 6000 series devices in the
following sections.
• EM 6000 2-channel receiver >> “Using the EM 6000”
• SKM 6000 handheld transmitter >> “Using the SKM 6000”
• SK 6000 bodypack transmitter >> “Using the SK 6000”
• L 6000 charger and LM 6060, LM 6061 charging modules >> “Using the
L 6000”
You can find information about installing the products under “Install-
ing Digital 6000 series devices”.
In the sections below, you can find important information about specific
use cases.
• Establishing a radio link between the transmitter and receiver >> “Es-
tablishing a radio link”
• Synchronizing the receiver settings to the transmitter >> “Synchroniz-
ing devices”
•Using the operating menu of the receiver >> “Displays on the EM 6000
display panel”
• Information about status messages and error messages on the dis-
play >> “Status messages”