Sennheiser Digital 6000 - Operating the SKM 6000 Menu; Navigating through the Menu; Making Changes in a Menu Item; Menu Item Overview

Using the SKM 6000
121
Operating the SKM 6000 menu
Navigating through the menu
To open the menu:
▷ Press the SET button.
The operating menu is shown on the transmitter display panel.
To open a menu item:
▷ Press the UP or DOWN buttons to navigate through the individual
menu items.
▷ Press the SET button to open the selected menu item.
“Operating elements of the SKM 6000 handheld transmitter”
Making changes in a menu item
After you open a menu item, you can make changes as follows:
▷ Press the UP or DOWN buttons to set the displayed value.
▷ Press the SET button to save the setting.
▷ Press the ESC (ON/OFF) button to leave the menu item without saving
the setting.
“Operating elements of the SKM 6000 handheld transmitter”
Menu item overview
In the menu items, you can configure the settings below and display infor-
mation.
Tune menu item
In this menu item, you can adjust a frequency in 25 kHz steps.
When you save the setting, the set frequency is automatically as-
signed to the user-defined frequency preset U, the handheld transmitter
switches from the frequency preset set up to now to the frequency preset
U, and sends a radio signal to the set frequency.
Preset menu item
This menu item displays the frequency preset U together with its
corresponding frequency. You cannot configure any settings here.
Name menu item
In this menu item, you can set a freely selectable name for the
transmitter. The name can be up to 6 characters long.
If you enter a name for the radio link in the Name menu item on the re-
ceiver and synchronize the receiver with a transmitter, the name en-
tered in the transmitter is overwritten with the name entered in the
receiver.
Gain menu item
In this menu item, you can adjust the input gain in 3 dB steps.
Alternatively, you can also adjust the input gain in the receiver and
synchronize it with the transmitter. See “Sync Settings menu item”.