Using the L 6000
137
LM 6060 and LM 6061 status LEDs
The two LM 6060 and LM 6061 modules each have two charging slots.
Next to each charging slot, there is a status LED that displays the following
status information:
►
Flashing red >> the charging slot or rechargeable battery is too
hot and the charging process was stopped.
Lights up red >> the rechargeable battery is defective.
Flashing yellow >> the rechargeable battery is being regenerat-
ed.
Lights up yellow >> the rechargeable battery is being charged.
Charge level 0% to 80%
Flashing green >> the rechargeable battery is being charged.
Charge level 81% to 96%
Lights up green >> the rechargeable battery is fully charged.
Charge level 100%
LM 6060 and LM 6061 status LEDs in storage mode
If you are operating the L 6000 charger in storage mode via WSM, the
meaning of the status indicators changes. You can find more information
under “Preparing rechargeable batteries for storage (storage mode)”.
To Next Page
Loading...
