Using the L 6000
140
Updating the firmware
You can update the firmware for the L 6000 charger using the Sennheiser
Wireless Systems Manager (WSM) software.
▷ To do so, connect the L 6000 charger to a network (see “Connecting
the L 6000 to a network”) and establish the connection with the WSM
software.
For more information about controlling devices via the Sennheiser
Wireless Systems Manager (WSM) software, refer to the instruction
manual for the software. You can download the software at
www.sennheiser.com/download.
To Next Page
Loading...
