Products in the Digital 6000 series
9
EM 6000 | EM 6000 DANTE 2-channel receiver
►
The digital 2-channel receiver works via a switching bandwidth of 244 MHz
(470 to 714 MHz) that is covered by three transmitter versions (470 to
558MHz, 550 to 638MHz and 630 to 718MHz). For larger 4-channel sys-
tems, you can cascade up to EM 6000s without using additional antenna
splitters and you then require only one pair of antennas.
The 2-channel receiver is available in 2 variants:
• EM 6000
• EM 6000 DANTE
The EM 6000 DANTE variant is identical in construction to the EM 6000.
The only difference is that it also has an integrated Dante™ interface (Audi-
nate Brooklyn II) for connecting the device to a Dante™ network.
You can find more detailed information about the EM 6000 in the fol-
lowing sections:
• Installation: “Installing the EM 6000”
• Operation: “Using the EM 6000”
• Technical data: “EM 6000” or “EM 6000 DANTE”
Package contents
• 1 EM 6000 or EM 6000 DANTE 2-channel receiver
• 1 mains cables (EU, UK, or US variant)
•2 antennas
• 2 antenna cables (BNC, 50 Ω)
• 4 rubber feet
• 1 short instructions
• 1 manual with safety instructions
• 1 manual with technical data
To Next Page
Loading...
